Jump to content

DIY ARGB ARC REACTOR


DiyProjectLab

Recommended Posts

Hii Friends Today I'll Show You How To Make Simple DIY Arc Reactor Using WemosD1

SO LET'S Make It🔥

Please Subscribe My Channel For More

Supplies:

Hardware:

WemosD1
Ws2812b RGB Led Strip
3D printed Box
Some Wires
5V Adapter
: Buying these from local shops would be a better

Software
:- Arduino IDE
Blynk

TipQuestionComment

Step 1: Step 1: WS2812B LED (Neopixe L) Strips Are Individually Addressable LED Strips

FL2B0GAKDU8TJM5.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597436885
F0GZO5JKDU8TJM9.jpg?auto=webp&frame=1&width=320&md=1597436887


WS2812B LED (Neopixel) Strips are individually addressable LED strips. These are awesome tools. The ability to program each LED individually using only one data line is amazing. The pad on the strips allow you to solder directly to this semi-flexible PCB, but I find that a little cumbersome. Here's how I make modular hookups for these types of strips or the older 4-pin style of addressable strips.

TipQuestionComment

Step 2: Print Your Arc Reactor With 3D Printer

FPHY0BPKDU8TJN6.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597436930
FI4YDYDKDU8TJNC.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597436932
F5J9S0SKDU8TJNI.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597436933
F6UEFSDKDU8TJNX.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597436937
pixel.png

I made this using 3D printer

TipQuestionComment

Step 3: Put the Wemos D1 in Arc Reactor

F3AUI7BKDU8TJQE.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437016
F75W6BVKDU8TJQP.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437018
FQCEF4EKDU8TJR0.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437020

I have used Wemos D1 to make it because it is very small and also works great.
You can also use Nodamcu
 

TipQuestionComment

Step 4: RGB STRIP LED

F9ZR90AKDU8TKDZ.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437166
FYGQEUQKDU8TKED.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437168
F8S2KPWKDU8TKF6.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437174
F8AWDS6KDU8TKER.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437171


I used this W2812b RGB Strip led in it

I would advise you to use the same as they are very good

Now you put the strip led in a REACTOR

As shown in the image


Connections :-
Vcc to 5V
GND to GND
Din pin to D3

TipQuestionComment

Step 5: Put All Part in Arc Reactor

FNNYMRXKDU8TKZB.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437273
FDZ126MKDU8TKZT.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437276
FRO2S9PKDU8TL1B.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437279
FWE9G5JKDU8TL4M.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437317

Now paste all the parts into it

TipQuestionComment

Step 6: Let's Programming

FWYCSYUKDU8TLJB.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437373
F90BTT1KDU8TLI3.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437371

Download Libraries

First we will need the adafruit neopixel library to control the LEDs. It can be found in the libraries manager, just search for 'adafruit neopixel' and select the one shown and install it....
Then to download the board definitions, open prefrences and paste ..

http://arduino.esp8266.com/stable/package_esp8266c... into the 'additional board URLs' box. Then open boards manager and search for 'esp8266' it should be the first one, click on it and install it....

Code
Create a new sketch and name it 'neopixels on WemosD1 with blynk' (or something that you're going to remember). Paste in the code. Change 'yourAuthCode' to the auth code for your project. (found in the 'nut' icon in blynk app) Change your wifi name and password to those of your network. Set the number of neopixels to the length of your strip. Plug your MCU into your computer, select Wemos D1 from the board menu in the ide, select the COM port and baud rate(115200) but ignore all the rest, it should be pre-configured.

Then upload!!

TipQuestionComment

Step 7: BLYNK

FAXOU4BKDU8TLX0.jpg?auto=webp&frame=1&width=320&md=1597437545
FP9F6VXKDU8TLYE.jpg?auto=webp&frame=1&width=320&md=1597437548
FLENO2FKDU8TLXP.jpg?auto=webp&frame=1&width=320&md=1597437546

Install blynk app from app store or play store.

Create a New Project in BLYNK app.Write Project Name and Select Wemos or WemosD1 from dropdown.An AUTH token will be sent to your registered email, note this down.Tap on the screen and add a ZERGBA WIDGET on screen..
Note: This will change colors only over WIFI not over internet.

TipQuestionComment

Step 8: Finished

FRPOL34KDU8TM9K.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437618
F79PWVTKDU8TMAC.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437620
F2T7QNIKDU8TMBU.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437623
FZJNAX5KDU8TMDE.jpg?auto=webp&frame=1&crop=3:2&width=320&md=1597437624

Thanks For watch

❤️
If you have any doubt, please ask in the inbox❤️

TipQuestionComment

Step 9: Thanks Nextpcb for Sponsoship

FP3KJHCKDU8TNLV.jpg?auto=webp&frame=1&width=320&md=1597438221
FU0YP6LKDZYNG5P.jpg?auto=webp&frame=1&md=1597777015
FDUSZLCKDZYNG6O.png?auto=webp&frame=1&width=320&md=1597777019

If you don't make your PCBs yourself, where do you make them?Personally, I do not have the space and the courage (nor the skill) to do them myself.For SF, I turn to Util-Pocket, because I find that the quality is excellent for the price.For the DF (with metallic holes), I tried several companies, all of which do a good job, but it costs a lot.This time I addressed myself here. I had 3 circuits to do, totaling an average surface of 49 cm2.When I saw that the minimum quantity to order was 5 PCBs, I continued my order out of curiosity, just to see the quote.And when I saw the asking price, I placed the order.NEXTPCB

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...