tariq

the URL not working code C and simulation proteus file

On 11/12/2015 at 9:33 PM, minhrung said:

In previous versions Traffic light project can only function control LEDs and display count, can not set a time for each to be led by hand. In this version, we absolutely can set the time for the system via the button lights easily.

To understand this project faster, you can review the following basic project:

• Treatment Project button buttons
• 7 segment display and programmable 7-segment LED scan
• Scan 2 7-segment LED on the pic 16f877a

Basically this project like project "Simulation of traffic lights - Traffic light", but here there is a system update installed part time. Which means that, you absolutely can set the time for the easily led system through push buttons.

• Button (+): increase 1 function unit (number).
• Button (-): function reduction unit (s)
• Set Red Led: when you use the button (+), (-) to select the time and use this button to set the time for the red LED.
• Set Yellow Led: set time for yellow LED.
• Set Blue Led: set time for yellow LED.
• Enter: the completion of the set time for the LED, press the Enter key to system operation.

When you want to reset the parameters when pressing button (Reset), at which the program will start from scratch and you can reinstall the time.

|| code C and simulation proteus file

 code C and simulation proteus file not working